Fire & Smoke Damage Restoration in Portland, OR — 24/7 Emergency Response

Fire is out — but the damage isn't done. Smoke, soot, and char continue destroying your home long after the flames are gone. TIK Restoration responds across Portland Metro within 45–60 minutes, 24/7. Licensed in Oregon, IICRC-certified, direct insurance billing from day one.

We Answer 24/7

Fire Damage in Portland — What Happens After the Fire Trucks Leave

The fire is out. The firefighters are gone. And now you’re standing in your Portland home looking at the damage — and wondering what happens next.

Here’s what most homeowners don’t know: the destruction doesn’t stop when the fire does.

Smoke and soot are chemically active. Within hours of a fire, acidic soot begins permanently etching metal surfaces, discoloring walls, and embedding into porous materials like wood, drywall, insulation, and fabric. Within 72 hours, smoke odor penetrates deep into structural materials — making it nearly impossible to remove without professional equipment. Firefighting water — often hundreds of gallons — soaks into floors, walls, and ceilings, creating a secondary water damage emergency that leads to mold within 24–48 hours if not addressed immediately.

Portland’s housing stock makes this especially critical. The city’s older neighborhoods — Sellwood, Irvington, Ladd’s Addition, Woodstock, and St. Johns — contain a large number of craftsman bungalows, Victorian-era homes, and mid-century structures with original wood framing, plaster walls, and hardwood floors that absorb smoke and soot deeply. These materials are irreplaceable — and they require specialized restoration techniques, not demolition.

TIK Restoration responds to fire damage as the multi-layered emergency it is. We address fire damage, smoke and soot removal, water damage from firefighting, structural assessment, odor elimination, and full reconstruction — under one licensed contractor, with one insurance claim, from start to finish.

The Hidden Damage That Continues After the Fire Is Out

Most homeowners focus on what burned. The real cost is often what didn't burn — but was damaged by smoke, soot, and water:

Acidic soot

begins permanently etching metal fixtures, appliances, and hardware within hours

Smoke odor

penetrates drywall, insulation, wood framing, HVAC ductwork, and furniture — and becomes nearly impossible to remove after 72 hours without professional treatment

Firefighting water

— often 200–500 gallons per room — soaks into subfloors, wall cavities, and ceilings, creating immediate mold risk

Soot residue

on walls and ceilings continues to off-gas toxic compounds and stain surfaces if not removed with proper techniques

HVAC contamination

— smoke travels through ductwork and deposits soot throughout the entire home, including rooms far from the fire

Structural compromise

— heat weakens wood framing, drywall, and load-bearing elements even in areas that didn't directly burn

Electrical hazards

— heat and water damage to wiring creates ongoing fire and shock risk that must be assessed before re-entry

Every hour of delay increases the scope — and the cost — of restoration.

Call 24/7 Emergency

Serving All of Portland Metro — Including Your Neighborhood

Our fire and smoke damage restoration crews are available 24/7 throughout the area:

Portland Proper

Downtown, Pearl District, NW, NE, SE, SW, St. Johns, Sellwood, Irvington, Woodstock, and Ladd's Addition

West Side

Beaverton, Hillsboro, Tigard, Aloha, Tualatin, and Sherwood

East Side

Gresham, Clackamas, Milwaukie, Oregon City, and Happy Valley

North

Vancouver, WA and Camas — fully licensed in both OR & WA

Not sure if we cover your area? Call us — we'll confirm in 30 seconds.

Why Portland Homeowners Trust TIK Restoration After a Fire

After a fire, you need one contractor who handles everything — not three companies pointing fingers at each other. Here's why Portland homeowners call TIK first.

One Contractor — Fire, Smoke, Water, and Reconstruction

Most restoration companies handle cleanup and hand you off to a separate contractor for rebuilding. TIK Restoration is licensed for both restoration and full reconstruction — meaning one team, one point of contact, and one insurance claim from emergency response through final rebuild. No handoffs. No gaps. No finger-pointing between contractors.

IICRC-Certified Fire & Smoke Restoration

Our technicians hold IICRC certification in fire and smoke damage restoration — the industry standard for proper soot removal, odor elimination, and structural assessment. We know which materials can be restored and which must be replaced — saving you money while protecting your home's integrity.

Smoke Odor Elimination — Not Masking

Consumer air fresheners and paint-over approaches don't work on smoke odor — they mask it temporarily while the smell continues to off-gas from structural materials. We use thermal fogging, hydroxyl generators, and ozone treatment to neutralize smoke odor at the molecular level — in walls, ductwork, and structural framing — permanently.

Firefighting Water Damage Addressed Immediately

We treat fire damage and water damage simultaneously — because they always occur together. Our crews arrive with both fire restoration equipment and water extraction equipment, addressing both emergencies in a single coordinated response. This prevents the secondary mold crisis that follows most house fires when water damage is ignored.

Oregon Licensed for Full Reconstruction

Licensed under Oregon CCB #229356 for both restoration and construction. When structural repairs, drywall replacement, flooring, or full room rebuilds are needed, we handle it — no subcontracting, no delays waiting for a separate builder to become available.

Insurance Claim Advocacy From Day One

Fire insurance claims are complex. We document everything from the moment we arrive — photos, thermal imaging, moisture readings, soot mapping, structural assessments — and work directly with your insurance adjuster to ensure the full scope of damage is covered. We've seen what happens when homeowners navigate fire claims alone, and we make sure that doesn't happen to our clients.

Call 24/7 Emergency

Our Fire & Smoke Damage Restoration Process in Portland, OR

From your first call to a fully restored, documented, mold-free home:

You call

A real person answers immediately — no voicemail, no answering service. We take your address and dispatch a crew while you're still on the phone.

Crew dispatched

On-site within 45–60 minutes anywhere in Portland Metro — with both fire restoration and water extraction equipment loaded and ready.

Emergency stabilization

Board-up, roof tarping, and structural safety assessment to secure your property against weather, theft, and further damage before restoration begins.

Water extraction

Firefighting water — often 200–500 gallons per room — removed immediately with industrial pumps. Every hour of delay increases mold risk.

Soot and smoke mapping

We document all affected areas using thermal imaging — including HVAC ductwork, attic, and rooms far from the fire origin. This map drives the insurance claim scope.

Structural drying

Commercial air movers and dehumidifiers address all water-affected areas over 3–5 days. Moisture readings logged daily for insurance documentation.

Reconstruction

Structural repairs, drywall, flooring, painting, and full room rebuilds handled by our Oregon CCB-licensed construction team — no subcontracting, no delays.

Final inspection & insurance documentation

Complete report with photos, scope of work, moisture logs, and cost documentation delivered to your insurance adjuster. Final walkthrough with you before we close the job.

We work with your insurance company

+ More

TIK Restoration is a division of TIK Construction. Some reviews may show "TIK Construction", but they refer to the same licensed team.

Google Reviews

TIK Construction — Restoration Division: TIK Restoration

You're Protected. We're Accountable.

Fire & Smoke Damage Restoration FAQ — Portland, OR

Honest answers to the questions Portland homeowners ask after a fire.

The fire is out. Can I go back into my home?

Not until it has been cleared by the fire department and assessed for structural safety and electrical hazards. Even in rooms that appear undamaged, smoke residue, soot off-gassing, and compromised electrical systems can make re-entry dangerous. Call us — we’ll conduct a safety assessment as part of our free on-site evaluation before anyone enters.

How much does fire and smoke damage restoration cost in Portland?

Costs vary widely depending on scope. A contained kitchen fire with smoke damage throughout the home typically runs $5,000–$15,000. Fires involving structural damage and reconstruction can range from $20,000 to $80,000+. In virtually all cases, homeowner’s insurance covers fire damage — including smoke, soot, water from firefighting, and reconstruction. We provide a free on-site assessment and work directly with your Oregon insurance carrier from day one.

My home didn't burn down — just one room. Do I still need professional restoration?

Yes — and this is one of the most important things to understand about fire damage. Smoke and soot travel through HVAC systems, wall cavities, and air movement throughout the entire home — not just the room where the fire occurred. A kitchen fire in NE Portland can deposit soot in bedrooms on the opposite side of the house. Professional assessment of the full scope is essential before any cleaning begins.

How long does fire and smoke damage restoration take?

It depends entirely on the scope. A contained kitchen fire with smoke damage throughout the home may take 1–2 weeks. A fire that damaged multiple rooms and requires structural reconstruction can take 4–12 weeks. We’ll give you a realistic timeline during the initial assessment — and we’ll keep you updated throughout the process.

Will my homeowner's insurance cover fire and smoke damage restoration in Portland?

Yes — fire damage is one of the most commonly covered perils in standard homeowner’s insurance policies. This includes smoke damage, soot removal, water damage from firefighting, temporary housing costs, and reconstruction. We work directly with all major Oregon insurance carriers and provide complete documentation to support your claim from day one.

Can smoke odor really be permanently eliminated?

Yes — but only with professional equipment. Consumer products mask odor temporarily. Professional thermal fogging, hydroxyl generation, and ozone treatment neutralize smoke compounds at the molecular level — inside walls, ductwork, and structural materials. When done correctly, smoke odor is permanently eliminated, not covered up.

What is the difference between fire restoration and reconstruction?

Fire restoration covers cleanup, soot removal, odor elimination, and drying. Reconstruction covers structural repairs — replacing burned framing, drywall, flooring, roofing, and finishing work. Many restoration companies only do the cleanup and hand you off to a separate contractor for rebuilding. TIK Restoration is licensed for both — meaning we take your home from emergency response all the way to move-in ready under one contract.

How quickly does soot damage become permanent?

Acidic soot begins permanently etching and staining surfaces within hours of a fire. Metal fixtures, appliances, and countertops can be permanently discolored within 24–48 hours. This is why rapid response is critical — the sooner soot is professionally removed, the more materials can be saved rather than replaced.

The Fire Is Out — But the Clock Is Still Running

Every hour after a fire, soot etches deeper, smoke odor penetrates further, and firefighting water moves closer to becoming a mold problem. The difference between saving your home's original materials and replacing everything is often measured in hours — not days.

Soot becomes permanent within 24–48 hours. The sooner you call, the more we can save.